AT3817A High Precision Digital LCR Meter Bridge Tester with 10Hz-100kHz Frequency Condition: Item Type: LCR Tester Material: ABS + Metal Model AT3817A Measurement Parameter Cs-Rs, Cs-D, Cp-Rp, Cp-D, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q, G-B, R-X, Z-θrad, Z-θdeg DCR Monitoring Parameter Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ% Basic Accuracy 0.05% Test Frequency 10Hz-100kHz (Continuous frequency, resolution 0.001Hz) Display Range L: 0.00001μH-999999H C: 0.00001pF - 999999μF R, Z: 0.00001Ω - 99.9999MΩ D: 0.00001–9.99999 Q: 0.00001 – 99999.9 Δ%: -999999% - 999999% θ (deg): -179.999o - 179.999o °θ (rad): -3.14159 – 3.14159 DCR: 0.00001Ω - 99.9999MΩ Output Impedance 30Ω, 50Ω and 100Ω Range Automatic, manual and nominal range, 9 ranges Maximum Reading All 6 digits, main parameters: 999999, Sub-parameter: 999999, Monitoring parameters: 999999 Signal Level 0.01V-2.00V (10mV step) Test Speed 30 times / sec, 10 times / sec, 6 times / sec, 3 times / sec; at the same time can be 1-256 times average Comparator 14 files sorting, 10 combined grid files, 1 group unqualified file, 1 group auxiliary file, 2 groups of main parameter unqualified files Calibration Open/short sweep, 3-point frequency clearing and load calibration File 10 groups of files, save all user settings, 1 group file saves system data in real time Interface RS232C, ExHandler interface, standard USB disk interface Other LCR automatic selection, true color TFT-LCD display, store 999 LCD screens, trigger delay, automatic level control Power Requirement Frequency: 50Hz-60Hz, Power: Maximum 20VA Product Size Approx. 264 x 107 x 350 mm / 10.4 x 4.2 x 13.8 in Weight Approx. 4400g / 155.2oz