Automatic water level control for tank float valve towers

¥6,890
配送料無料

Automatic water level control for tank float valve towers

販売元:

¥6,890

保存する ¥2,000 (22%)

希望小売価格

¥8,890
在庫あり
配送料無料

14日間返品ポリシー

支払い方法:

  • ブランド: Unbranded

商品詳細

商品詳細

Automatic water level control for tank float valve towers

This check valve can replace traditional float valves and is compatible with various high-level water tanks, pools, and towers in industrial and civil buildings. It automatically controls water flow, replenishes at low levels, and automatically stops when full. It has four inlets for large water output, a beautiful appearance, a compact size, and is practical and convenient to install. It requires no electricity, is easy to use, has a long service life, a low failure rate, and saves water resources. Operating pressure range: 1-10KG (0-1-1MPa). Compatible media: clean water; compatible media temperature: 70℃; high-temperature resistant media temperature: 70℃-120℃. When the water level in the pool or check valve drops, the check valve body sinks and the check valve control valve core opens. When the water pressure in the pipeline changes, the sealing surface of the control valve will open and water will flow out, and vice versa. Note that this product is a level control valve. When installing, the float must be vertical. If it needs to be installed from the top, an elbow is required to connect the valve float and the inlet pipe. First, the inlet pipe should be fixed on a horizontal surface. Then, connect the automatic water level control valve to the inlet according to the standard. The inner diameter of the main inlet should be the same as the normal diameter of the control valve. When in use, the valve's shut-off valve should be fully open. If two valves are installed in the same pool, the two valves should be kept on the same horizontal surface. Before installation, please clean the impurities in the pipe to avoid blockage. If the water quality is poor, the valve needs to be properly maintained. If the user finds that the water filling time is too long, simply flush the inlet. Material: Nylon PA66 + food-grade rubber. Size: 72x50x70mm. Quantity: 1 piece. Note: Please allow an error of 1-3mm due to manual measurement. Please ensure that you do not mind before bidding. Due to differences in different monitors, the picture may not reflect the actual color of the item. Thank you. Package contents: 1 x Water level control valve
  • Fruugo ID: 544793497-1101311396
安全性

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Select the appropriate model based on specifications.

配送

配達

2日間以内に発送

  • STANDARD: 無料 - 間の配達 月 02 11月 2026–水 11 11月 2026 - 無料

中国より発送。

返品

返品

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。

全額返金ポリシーを見る