The B75 USB-BTC motherboard uses all-solid capacitors to make the motherboard more stable. It supports LGA1155 CPU and uses the B75 chipset to give full play to the CPU performance. The motherboard is suitable for the mining industry due to low and expansion interfaces. The appearance and color of different batches of products may be different, which will not affect the use CPU type: Support For 1155; CPU socket: LGA_1155; Memory type: support 2*DDR3; Maximum memory capacity: support a of 16G, a single maximum of 8G; Memory description: support 1333/1600MHz frequency; Network card chip: 1*REALTEK 100M network card; Audio chip: N/A. (1) Display interface: 1*-compatible, 1*VGA (2) USB rear: 2*USB2.0 (3) USB front: 1*USB2.0 (4) USB rear: 2*USB3.0 (5) USB front: 1*USB3.0 (6) interface: 4*SATA (7) Graphics interface: 8*PCIE1X (USB ) (8) Network card interface: 1*LAN 100M network card (9) Memory slot: 2*DDR3 (10) CPU socket: LGA (1155) (11) Chipset: BGA (B75) (12) interface: 1*MSATA (13) BIOS initial restoration: JCMOS (14) Speaker interface: 1SPK (15) Power interface: 24pin_ATXPWR (16) Power interface: 4pin_ATX12V Chipset: For B75 Chipset Note: Random color, ' accept the specified color. size: 230.32mm x 174.92mm Material: PCB colour: black Package Contents: 1 x Motherboard 1 x Random CPU(Note: The CPU is a giveaway, not covered under , not included in the entire order , ' place an order if you mind, .) 1 x DDR3 4GB 1600Mhz RAM (the appearance and color are random, ' accept the specified appearance and color) 1 x 128G MSATA SSD (the appearance and color are random, ' accept the specified appearanceand color) 1 x Cooling Fan (the appearance and color are random, ' accept the specified appearance and color) 1 x SATA Cable(random color and appearance) 1 x Switch Cable(random color) 1 x Baffle(random color and appearance) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.