Bandsaw Tires Replacement for DeWalt and Porter Cable bandsaw rubber tire part numbers 650721-00, A02807, 5140020-79, 65072100, 514002079, 725, 726, 736, 7724, 9725, PC7723, DW328. Band saw tire has an outer diameter of 6 inches and width of 1/2 inch. Compatibility: Fits Band Saw Models: 3128-BDK Type 2, 3128K Type 2, 3129 Type 2, 3129K Type 2, 725 Type 1, 725 Type 2, 725 Type 3, 726 Type 1, 726 Type 2, 726 Type 3, 736 Type 1, 7724 Type 1, 7724 Type 2, 7724 Type 3, 9725 Type 1, 9725 Type 2, 9725 Type 3, D28770 Type 1, D28770K Type 1, DCS374B Type 1, DCS374P2 Type 1, DW328 Type 3, DW328 Type 4, DW328K Type 2, DW328K Type 3, DW328K Type 4, DW329 Type 2. DWM120 Tire: Fits Band Saw Models: 6230 (SER 678-1001), (SER 678-1105), (SER 678-26651), (SER 678-31501), (SER 678-32001), (SER 678A), (SER 678B), (SER 678C), (SER 678D), (SER 678E), (SER 678F), (SER 678G), (SER 678H), 4-3/4 Inch Deep Cut Band Saw 6230, DWM120 Type 1, DWM120 Type 2, DWM120K Type 1, DWM120K Type 2, J-724 Type 1, J-724 Type 2, J-724 Type 3, PC7723 Type 1, PC7723 Type 2, PC7723 Type 3. Rubber Tire: Two tires are needed on the bandsaw. If one tire is worn, it is advisable to replace both at the same time. Blade pulley tire helps keep the blade tracking correctly. Over time, tires may become brittle or stretched, which can cause the blade to come off the pulleys or not track properly. 650721-00 Tire: It is recommended to check the condition of the tire every 3 to 6 months to ensure it does not affect normal operation. If worn, replace the tire to maintain optimal bandsaw performance. The tires simply stretch onto the pulleys; no disassembly of parts is required.