Model Name: Yamaha IMMO Emulator Function: Immobilizer Emulator Immobilizer Emulator for Yamaha motorcycles and scooters Compatible with Yamaha motorcycles and scooters from 2006 to 2009 No programming required—simple wire connection only Fully emulates standard immobilizer functionality, including LED indicator on the instrument panel Installation steps (when replacing a standard immobilizer): 1. Remove adhesive sealant from the original immobilizer housing 2. Remove the PCB from the original immobilizer and desolder the wires 3. Connect the emulator according to the provided wiring diagram 4. Place the emulator into the original immobilizer housing Wire color coding and function: Black (2 pcs.): Ground (GND) Red: Battery (+12 V) Yellow: Ignition (+12 V) Gray: LED (+5 V) Blue: K-line (Immo-ECU communication) Color: Green Material: Electronic components Package Contents: 1 x Immobilizer Emulator Note: Color may vary slightly due to lighting and screen settings. Measurement tolerance: ±1–3 cm.