Vgate car scanner for your needs! Designed for car enthusiasts who want to perform professional-level diagnostics. Fully compatible with all OBD2 protocols and commands, featuring an auto-sleep / auto-wake function that minimizes power consumption and helps protect your vehicle's battery life. Note: The auto-wake function is not supported on hybrid or pure electric vehicles. Key Features: - Read both generic and manufacturer-specific diagnostic trouble codes - Fast ARM processor capable of up to 30 PIDs per second - Display real-time ECU sensor data including engine speed, fuel system status, fuel pressure, oxygen sensor voltages, and other vehicle parameters - Prepare for emissions testing by checking readiness status - Read and clear trouble codes, turn off the MIL (check engine light) - View freeze frame data and I/M readiness monitors When paired with a compatible OBD2 app, the Vgate iCar Pro BLE4.0 unlocks additional diagnostic capabilities and enhanced functionality. After 30 minutes of inactivity following engine shutdown, the device automatically enters sleep mode to prevent battery drain. Advanced wake-up triggers activate the device when connecting via Bluetooth, unlocking the vehicle doors, or starting the engine. Compatible with all OBD2/EOBD compliant vehicles: - Gasoline vehicles from 2001 onwards (Europe), 1996 onwards (USA), and 1998 onwards (Canada) - Diesel vehicles from 2003/2004 onwards (Europe) Designed for use with 12V gasoline vehicles and light-duty 12V diesel vehicles with a gross weight of 6.5T or less that support OBD2 protocols. Not compatible with heavy-duty 24V diesel vehicles such as semi-trailers or tractors, which use different communication systems. Supported Apps: iOS: Bimmercode, OBD Fusion, OBD Auto Doctor, OBD Car Doctor, JScan, and others Android: Torque Pro, Torque Lite, JScan, OBD Fusion, OBD Auto Doctor, and others Note: Connection requires a third-party OBD2 application on iOS or Android devices. App functionality varies based on software selection. Connection Instructions: 1. Plug the Vgate iCar Pro Bluetooth 4.0 OBD2 adapter into the vehicle’s OBD2 port 2. Enable Bluetooth on your smartphone 3. For Android devices, connect using the name "Android-Vlink" 4. For iOS devices, enable Bluetooth and configure the device name within the OBD2 app settings 5. Launch the app and begin diagnostics Supports all standard OBD2 communication protocols: - SAE J1850-PWM - SAE J1850-VPW - ISO 9141-2 - ISO 14230-4 (slow and fast) - ISO 15765-4 (CAN) - SAE J1939 (CAN) - ISO 11898 (raw CAN) Professional OBD2 diagnostic tool designed for reliable performance and broad vehicle compatibility. Low energy consumption ensures long-term usage without battery concerns.