STRONG FOLIA PROTECTIVE FOR DOOR HANDLES BMW Car Stickers For Auto A set of STRONG, thick protective stickers for door handles and doors or mirrors with the BMW logo. Suggested mounting locations: door handle recesses door mirrors 4 pieces of door handle cavity stickers. 4 protective strips for mirrors, door handles or doors Colour: black Self-adhesive Silver logo BMW Ideal for protecting door handle cavities, which are often unconsciously destroyed during everyday use. Additionally, the stickers will be great as a decorative accent emphasizing the brand of the car. Protection with style! Our stickers are made in resin technology applied to the protective film, thanks to which they perfectly protect the door handles exposed to scratches. Additionally, the sunken silver logo perfectly emphasizes the visual aspect of each car. Made of thick, flexible rubber coated with resin for extra protection. Blended BMW logo in silver glossy. Resin technology 3D - maximum protection against scratches and upholstery. Protection for mirrors, doors or door handles You can also stick protective strips on the edges of doors or mirrors. Dimensions of stickers: 80 x 80 mm - door handle stickers 80 x 13 mm - protective strips The set includes: 4 door handle stickers with logo 4 glued stripes with logo Clear paper manual with application guidelines The pictures below show the actual appearance of our stickers. Assembly instructions: 1. Prepare the surface for gluing, it must be dry, clean and degreased. 2. Before applying the stickers, wipe the application areas with the included adhesive activator wipes. 3. Wait 2 minutes after rubbing to activate the foundation. 4. Stick the stickers in the desired place, press firmly on the entire surface, especially on the edges. 5. The adhesive activates about 48 hours after application, during this time avoid washing the car at the car wash. For better adhesive activation, heat the stickers gently with a hair dryer after applying. Attention Due to the thick layer of resin, the stickers are quite hard before assembly, in order to properly mount and avoid peeling off, it is recommended to heat the stickers with a dryer or heat gun BEFORE APPLYING, this will soften the resin layer, better activate the glue and allow the stickers to adapt to the shape of the body.