Feature:1. The brushless DC motor runs smoothly and has low noise, providing you with a quiet environment.2. This electric water pump can work continuously for up to 20,000 hours, not only that, it also has IP68 waterproof performance.3. It is very suitable for aquariums, fish tanks, fountains and hydroponic systems.4. The submersible pump is made of engineering plastics, which is explosion proof and non sparking.5. It can be disassembled without any tools, easy to separate and easy to clean.Specification:Item Type: Brushless Booster PumpMaterial: Engineering PlasticWater Pump Housing Material: PA66+30% Glass FiberMagnet Material: Plastic MagnetWire Frame Material: Nylon Material PA66Rotor Material: GraphitePower Cord Material: PVCShaft Material: CeramicModel: BS-40ARated Flow: 900m/hVoltage: DC 24VCurrent: 1.3APower: 31.2WStarting Voltage: 12VWaterproof Rating: IP68Rated Head: 8m/26.2ftUse Environment Temperature: -20~80Use Environment Humidity: Below 90%RHUse Medium Temperature: -20~100Use Medium: Water, Alcohol, Diesel and Other Liquids with Good FluidityUse Place: Medical Treatment, Equipment, Electrical Appliances, etc.Life: 30000HInsulation Withstand Voltage Test: 1500V for 60 SecondsNoise: 40dBPurpose: Smart Toilet/Solar Water Heater/Dishwasher Water Pump.Package List:1 x BS40A DC 24V Brushless Booster PumpNote:1. The water pump is a DC water pump, and the voltage must be DC power supply (such as batteries, DC power supplies marked with DC, transformers), and the voltage is within the specified voltage range before it can be used.2. The water pump has its own water‑off protection function. In the absence of water, the pump will automatically stop after 1 minute of rotation. After adding water, re‑insert the power supply to operate normally.3.The water pump has a jam protection device. When impurities enter the pump body during use, after the rotor is jammed, the water pump will automatically stop running. After the power is removed to clean the impurities, the power can be re‑energized.3. It is strictly forbidden to use it in strong acid and strong alkaline solutions.4. It is strictly forbidden to use it in liquids with impurities and magnetic particles larger than 0.25MM. If the water is too dirty, clean up the impurities in the pump room in time.