Product Introduction: The MKS CAN V2.0 Pro module delivers high-speed transmission and operational stability, with enhanced electromagnetic interference (EMI) resistance. It is well-suited for industrial debugging and motor control applications. When used with the CandleLight firmware, the device appears as a native CAN interface on Linux systems. The CAN analyzer is compatible with ARM-based embedded platforms, including Raspberry Pi, Raspberry Pi Zero, ODROID, and BeagleBone, enabling seamless integration into custom products. Product Features: 1. Supports CAN 2.0A and CAN 2.0B protocols; baud rate up to 1 Mbps. 2. Compatible with CandleLight and SLCAN firmware; SLCAN supports testing at baud rates up to 2 Mbps and 5 Mbps. 3. Onboard termination resistor can be enabled or disabled via jumper. 4. Equipped with USB Type-C interface; supports online firmware updates and DFU mode upgrades. 5. Powered by a high-performance ARM Cortex-M4 STM32G431C8T6 microcontroller, operating up to 170 MHz. 6. Includes schematic diagrams, firmware, source code, and host software for easy development and deployment. Analyzer Board Version: V2.0 Pro Material: ABS Color: As shown Package Contents: 1 × USB data cable 1 × 3-pin double-ended cable 1 × CAN analyzer board Note: Color appearance may vary slightly due to screen settings and lighting conditions. Dimensional tolerance: ±1–3 cm.