Capacitive Fingerprint Reader Module with 508DPI Resolution and 192 X 192Pixel Array, UART TTL Interfaces for Embedde Access-Control Projects

Features: Integrated Fingerprint Workflow: The Cortex-based controller handles enrollment, scanning, template processing, and matching within the module, reducing the separate processing functions a host project must provide. Documented Sensing Specifications: A 508DPI resolution and 192x192sensing array define the input hardware, while matching in under 0.5seconds provides a clear response specification for project planning. Defined Serial Integration: The UART TTL interface supports selectable 9,600-115,200bps baud rates at 3.3 V, giving embedded builds a documented connection for host commands and data exchange. Built for Biometric Projects: Use the module for fingerprint entry devices, access-control equipment, safes, time-attendance equipment, and maker projects while matching the host controller to its 3.3 V UART TTL requirements. Included Connection Set: The package contains 1 G-type integrated capacitive fingerprint reader module, 1 6pin double-ended ribbon cable, and 1 6pin connection cable for planning the cable assembly. Specifications: Detection Type: Capacitive Touch Resolution: 508DPI Sensing Array: 192x192 Fingerprint Capacity: 1000Prints Comparison Time: Less than 0.5s Voltage: 3.3V Communication Interface: UART (TTL) Operating Temperature: -10°C to 60°C Package Includes: 1 piece Fingerprint Module 1 piece 6Pin Double-Ended Ribbon Cable 1 piece 6Pin Connecting Cable note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you donot mind before you order. 2.Due to the differences between different monitors, the picture may not reflect the actual color of the item.