Step 1: Disconnect the negative battery terminal before working on the switch to prevent short circuit. Next, unclip the handles using a screwdriver.Lift the faulty switch out of its harness. : If you don't want to the door casing or the door handle, a flat-head screwdriver under The switch bezel and pry it until it loosens to access the housing. Step 3: Once the switch pops out of the bezel, disconnect it from the wire harness and detach it from the outlet. Remove the rockers before inserting a new switch into the harness holes. Step 4: Assemble the rockers into the new switch and snap the device into the bezel. Compatible With: for Boxer II 2006-2016 for Jumper 2006-2016 for Doblo Grossraumlimousine 263 2010-2014 for Doblo Kasten/ 263 2010-2014 for Ducato Bus 250 2006-2014 for Ducato Kasten 250 2006-2014 Colour:Black Material:Plastic Package Contents: 1x Power Window Switch Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.