1.Protects cluster screen from scratches, dust, debris, heat and UV 2.Seals existing scratches underneath and makes the cluster screen like new again 3.Easy to clean and wipe the without the fear to scratch the cluster screen 4.Leave no residue when removed 5.Comes with Cleaning kit and Squeegee Installation: 1. Clean the cluster screen with microfiber cloth to remove dirt and ; 2.Remove the liner with label Step1.(Make sure that the film doesn't come up with the clear liner) 3.With the liner removed completely, liberal amount of water on the adhesive side. 4. Alight the screen protector with button or edge then gently place it on the cluster. 5.Gently squeeze water and air pockets out with squeeze. Try to remove as much water and air pockets as you can. 6.Remove the liner with label Step2.(Make sure that the film remains perfectly aliged and doesn't come up with the top liner. 7.Use squeeze to remove remaining air pockets and water to complete the process. Congratulations! Your cluster screen is now fully protected with our product. (Due to personal craft problems, maybe a little bit is a normal phenomenon.) FITMENT: For CB125 CB125R CB150 CB250R CB300R 2018-2019 Material:TPU colour:Transparent Package Contents: 2 x film 1 set x accessories Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.