1.Planar contacts heating elements have a more certain contact than ceramic heating ring contacts 2.compared to the OT hotend heating elements and thermistors are easy to maintain and replace 3.Separate design of fixed flange and heating core.The flange is made of a material with a low thermal conductivity to reduce the working temperature of the heat sink fixed with it by screws. 4.Compatible with MK8 series nozzles that are readily available. 5.Drop-in replacement for the hotend of the K1 / K1 MAX and - printer. Can be direct installed on Extruder to increase flowrate by 50%. Name: HOTEND KIT hotend is a hot end component, it can directly replace the hot end on K1 or K1MAX or - printer. Colour:silver Material:Metal type:B: CHCBOT for K1 MAX Package Contents: 1 x updated KIT Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.