CONVENTIONAL CONSTRUCTION Clean drywall joints, fill plaster joints with caulk, then pour white latex, use tools to stick joint tape in center of joint. Tape Applicators and Cutters tape Also works for inside corners, edges and for all types of partitions and walls. TIME SAVING AND EFFICIENCYQuick-change internal angle applicator wheel easily reverses with flat applicator wheel. Tape Applicators and Tape Cutters Allows you to minimize movement. Unnecessary, reducing the risk back pain to almost 0! DUAL ADJUSTABLE HANDLE STRAPSOne on each side for right or left hand use. The drywaller has practical ergonomics, you can handle it in all directions. avoid bending the back In addition to ensuring a result uniform, the tape applicators and the tape cutters have a padded handle, for precise and pleasant work. NO NEED TO ANSWER COMPOUND Simple latch with hinged lid opens easily and quickly to load tape and mud. Durable polycarbonate body eliminates dents, dents, and bent parts for lasting longer life. Tape applicators and tape cutters are the best tool for tightening wall joints. HOW IT WORKS Unroll the gasket inside the; Pour your compound inside; Start caulking the cast iron of your partitions; Cut the joint with a smoothing blade; Use the big wheel for angles and the cogwheel for the corners. straight surfaces. Description: Without tools or messy changes, you can apply joint compound and tape simultaneously to flat joints, inside corners, and square sets in minutes, eliminating tedious, time-consuming adjustments. Multiple modes switch freely, you can adjust the working mode of this sewing according to your needs. More fixed rigid mode, giving you a more convenient experience. Features: Made of durable polycarbonate ABS Two adjustable soft-grip handles, for right- or left-handed use Accessible Compound Rate Adjustment Dial Unique clip design for quick access for charging and cleaning Designed to be used with paper tape or FibaFuse paperless fiber tape Introduction to use Crack repair: Clean the cracks of the plasterboard first, fill it with caulking plaster again, then use tools to stick the joint paper tape in the center of the crack. Conventional construction: Clean the joints of the plasterboard, fill the joints with caulking plaster, then pour white latex and use tools to stick the joint paper tape in the center of the joint. Application: Suitable for gypsum board joints to prevent the wall from cracking at the joints of two gypsum boards.