LSM6DSO is an attitude module with 3D digital accelerometer and 3D digital gyroscope. Improve performance at a speed of 0.55 mA in high-performance mode, and enable the always-on low-power function. LSM6DSO supports major OS requirements, provides real, virtual and batch processing of 9 KB sensors for dynamic data batch processing, compatible with for Androido Product parameters: 1. Linear acceleration measurement range: 2 / 4 / 8 / 16g full scale 2. Angular velocity measurement range: 125 / 250 / 500 / 1000 / 2000dps full scale 3. Working voltage: 3.3 V 4. 10 power supply: 1.62 V 5. Data interface: SPI / I2C & MIPI I3C SM serial interface, with main processor data synchronization function 6. Auxiliary SPI: OIS data output for gyroscope and accelerometer 7. Pedometer: step detector and step counter 8. Detection: display motion detection, tilt detection 9. Standard interrupt: free fall, wake up, 6D/4D direction, single click and double click 10. Programmable finite state machine: accelerometer, gyroscope and external sensor 11. Embedded temperature sensor 12. IIC clock rate: Less than 400KHZ (fast mode) 13. SPI clock frequency: Less than 10MHZ Due to different product batches, the circuit board printing is slightly different, which does not affect the use. Color:As shown Material:PC Package Contents: 1 * Sensor Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.