Cjmcu-mlx90614 Bcc Human Body Infrared Thermometer Non-contact Thermometer Serial Output Module

¥14,590
+ 配送料¥1,099

Cjmcu-mlx90614 Bcc Human Body Infrared Thermometer Non-contact Thermometer Serial Output Module

Cjmcu-mlx90614 Bcc Human Body Infrared Thermometer Non-contact Thermometer Serial Output Module

希望小売価格: ¥41,690
価格: ¥14,590
得する金額: ¥27,100 (65%)
販売元:
¥14,590
+ 配送料¥1,099

在庫あり

以下の支払い方法を利用することができます

説明

   Feature:  CJMCU-90614 is a low-cost infrared temperature module.  Working voltage 3-5v Low power consumption and small size.  Its working principle is to read infrared temperature data through single chip microcomputer, serial port (TTL level).  Communication mode output (the baud rate can be set): the baud rate of the serial port is 9600bps, 57600 and 115200bps.  There are two ways of continuous output and query output, which can adapt to different working environments and connect with all single chip computers and computers.  Object distance ratio: 1.6: 1.     letter of agreement:   Serial communication parameters (default baud rate value is 115200 bps, which can be set by software).  Baud rate: 9600 bps Check digit: N Data bit: 8 Stop bit: 1.  Baud rate: 57600 bps Check digit: N Data bit: 8 Stop bit: 1.  Baud rate: 115200 bps Check digit: N Data bit: 8 Stop bit: 1.  Module output format:  Instruction length: 9.     Data output format:  Byte1 frame header logo 0x66.  Byte2 frame header logo 0x66.  Byte3 data output mode (0x01 continuous output; 0x02 query output, default is continuous output mode).  Byte4 measurement data length (counted by Byte).  Byte5 data 1 high 8 bits.  Byte6 data 1 low 8 bits.  Byte7 data 2 high 8 bits.  Byte8 data 2 lower 8 bits.  Byte9 data parity bit (all 8 bits of data are accumulated).     Data calculation method:  Temperature = 8 bits of data high << 8 bits of data low, the result is the actual temperature multiplied by 100.  Command instruction (send to MCU, set various parameters).  Byte1 frame header logo 0x66.  Byte2 frame header flag 0x66.  Byte3 setting command.  0x01 continuous output mode.  0x02 query output mode.  0x11 Set baud rate to 9600.  0x12 Set the baud rate to 57600.  0x13 Set the baud rate to 115200.  Byte4 end of frame flag 0x56.     Instructions:  The module outputs data for the serial port, connect the module to the power supply, connect the serial port (the default is 115200 baud rate, continuous transmission mode), and the serial port outputs directly. If you want to change the sending method, you can send the command 66 66 02 56 to the module, and then send the command every time, the module will return the temperature data once. If you want to change the baud rate to 9600, you can send 66 66 11 56 to the module. If you want to change the baud rate to 57600, you can send 66 66 12 56 to the module.     Note:  No MCU source code is provided.     Package includes:  1 x Sensor board with pins
  • Fruugo ID: 311468076-695877217
  • EAN: 8727971208175

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

安全上の警告: Not suitable for children under 36 months, The parcel bag is not a toy. Keep away from children to avoid suffocation hazards.

配送と返品

2日間以内に発送

  • STANDARD: ¥1,099 - 間の配達 火 21 10月 2025–金 31 10月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • GreenZech
  • Shenzhen GreenZech Technology Co.,Ltd
  • 16C B97 Fuxuan Dalong Jiedao Longhua District
  • Guangdong China
  • Shenzhen
  • CN
  • 518000
  • 1158738758@qq.com
  • 14774955154

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1,PLANTA 1,DERECHA
  • OFICINA 3,Fuenlabrada
  • Madrid
  • ES
  • 28947
  • successservice3@gmail.com
  • +34 910602659