COMPATIBLE LCD Screen with Digitizer Complete Assembly COMPATIBLE LCD Screen with Digitizer Full Assembly Pre-Installation Notes Tip 1: Test Before Installation Do not remove any protective films or labels during testing. Please be aware of the issue of static electricity. Before attempting any repair, ensure you are grounded with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside the phone. Make sure you wear eye protection and be careful not to cut your fingers on glass shards. Tip 2: Simulate Testing The screen replacement is a very fragile product. We strongly recommend performing a test before installation. Please simulate the test, i.e., the mobile phone is disconnected (motherboard + LCD or screen), audio cable is connected, and the new replacement is installed. Power on the phone; the test is complete. If the test is OK, please install it. If it doesn't display, please contact us immediately. And please do not force it to install on the mobile phone. Once the screen is installed, we are no longer responsible. Tip 3: Do not bend the cable too sharply Please ensure that the LCD cable is not bent too sharply. A bend of more than 90 degrees will result in a black display. About the product 1. Replacement part for LCD display + touchscreen digitizer assembly 2. Replace your broken or unusable item with a new one 3. Make your device look fresher than ever 4. Fully fit and working 5. Each item has been checked before shipping and is in good condition 6. Professional installation is highly recommended. We are not responsible once the screen is installed.