CP2112 highly integrated USB to SMBus bridge controller integrates a USB2.0 full-speed function controller, USB transceiver oscillator and 8 GP10 pins.<br> via a simple GUI-based Single configurator selects all customization and configuration options, eliminating the need to develop complex firmware for standard HID class devices Supplied with software and drivers<br> the CP2112 device enables fast USB connectivity with minimal development effort.<br> 1. USB bus powered 4.0 to 5.25V<br> 2. Self-powered 3.0 to 3.6V, I/0 voltage 1.8V to<br> 3. Working environment temperature: -40C~85C<br> 4. On-chip reset circuit, on-chip voltage regulator: 3.45V output<br> 5. Comply with USB specification 2.0 standard, (12Mbps)<br> 6. Support USB suspend state through SUSPEND pin<br> 7. Integrated 194- one-time programmable ROM for storing customizable product information<br> 8.512- SMBus data buffer, configurable clock speed device address 7-bit value .<br> CP2112 slave device address<br> 9. for , and Linux HID to SMBus library for rapid application development , open river access interface specification<br> 10. 8 GPIOs configurable as input/output and open drain/push-pull for external devices<br> Configurable clock output 48MHz to 94KHZ, read/write SMBus device toggled LED<br> 11. Application areas: portable controller, USB dongle, data recording<br> Material: plastic+metal<br> colour: purple<br> Package Contents:<br> 1 x module<br> 2 x row pins<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.<br> Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-DIMEANI official store