CP2112 highly integrated USB to SMBus bridge controller integrates a USB 2.0 full-speed function controller, USB transceiver, oscillator, and 8 GPIO pins. Via a simple GUI-based configuration tool, all customization and configuration options can be selected, eliminating the need to develop complex firmware for standard HID class devices. Supplied with software and drivers. The CP2112 device enables fast USB connectivity with minimal development effort. 1. USB bus powered: 4.0 to 5.25V 2. Self-powered: 3.0 to 3.6V, I/O voltage: 1.8V to 5.25V 3. Operating temperature range: -40°C to 85°C 4. On-chip reset circuit, on-chip voltage regulator: 3.45V output 5. Complies with USB specification 2.0, full speed (12 Mbps) 6. Supports USB suspend state through SUSPEND pin 7. Integrated 194-byte one-time programmable ROM for storing customizable product information 8. 512-byte SMBus data buffer, configurable clock speed, device address with 7-bit value 9. HID to SMBus library for rapid application development on Windows and Linux 10. 8 GPIOs configurable as input/output, open drain or push-pull for external devices Configurable clock output from 48MHz to 94kHz, supports read/write operations on SMBus devices and LED toggling 11. Application areas: portable controllers, USB dongles, data logging Material: Plastic and metal Color: As shown in picture Package Contents: 1 x Module 2 x Row pins Note: Only the above items are included. Other products are not included. Note: Light reflection and different display settings may cause slight color differences between the image and the actual item. Measurement error allowed is +/- 1-3 cm.