DC 12V 0-5V 0-10V Voltage Signal Generator DAC Converter Module RS485 Modbus RTU for PLC Measuring Instruments

¥2,949
+ 配送料¥1,549

DC 12V 0-5V 0-10V Voltage Signal Generator DAC Converter Module RS485 Modbus RTU for PLC Measuring Instruments

  • ブランド: Unbranded

DC 12V 0-5V 0-10V Voltage Signal Generator DAC Converter Module RS485 Modbus RTU for PLC Measuring Instruments

  • ブランド: Unbranded
希望小売価格: ¥4,649
価格: ¥2,949
得する金額: ¥1,700 (36%)
販売元:
¥2,949
+ 配送料¥1,549

在庫あり

14日間返品ポリシー

以下の支払い方法を利用することができます

説明

DC 12V 0-5V 0-10V Voltage Signal Generator DAC Converter Module RS485 Modbus RTU for PLC Measuring Instruments

1. Operating Voltage : DC 12 (DC 12-25V), recommended power supply with small ripple. Operating Current : 12-13MA 2. MODBUS RTU Command support 03 06 function code. CH1(O1) output voltage is 0-5V, maximum output current is 20MA. 1-5V accuracy 1%, Less than 1V there is a ripple of 50HZ/40MV. 3. CH2(O2) output voltage is 0-10V, maximum output current is 20MA. 2-10V accuracy 1%, Less than 2V there is a ripple of 50HZ/80MV. 4. The voltage resolution is 0.01V, the output accuracy is 1%; if the error is greater than 1%, it can be calibrated 5. MODBUS commands can be made serial HyperTerminal (serial assistant) OR PLC Enter;Under the MODBUS command mode, it can support up to 247 devices in parallel. size:45 x 35 x 15mm Material:abs colour:green Package Contents: 1 x N4DAC02 12-25V 2 Channel PWM DAC RS485 Module
  • Fruugo ID: 447621469-940455258
  • EAN: 6439441264438

配送と返品

3日間以内に発送

  • STANDARD: ¥1,549 - 間の配達 火 30 12月 2025–水 07 1月 2026

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る