Features Powerful Anti -Interference Capacity: The input of the current voltage transmitter, the output and the power supply areolate each other, with strong anti -interference ability and high reliability. Protection: There is a common coating of the distribution current voltage transmitter, which can be used to protect the circuit board and related devices from damage. Insulation Performance: DC signal isolations have insulation, humidification, anti -vibration, anti -aging, discharge of electric halo and other characteristics. 35mm Standard Guide Rail Installation: The current signal isolator transmitter is the 35mm standard rail installation. It is convenient to install and save space, which is multifunctional. Separated: The current signal generated by the transmitter is isolated and transmitted from magnetic field to the control room, PLC, DCS, and other input ports. Specification: Item Type: DC Signal Isolator Material: ABS Model: GLG Channel: 1 in 1 out PWR (15-, 16+): 24V DC Input: 0-10V Distribution Voltage: DC 24V 2-Wire: (9-, 13+) 3-Wire: (9+, 10-, 13+) Power Supply: (9+, 10-) Output:  Channel 1 (1+, 2-): 0-10V Output Current: Load≤500Ω Output Voltage: Load≥10KΩ Accuracy: 0.1% FS Working Temperature Range: -20-+55℃ Electromagnetic Compatibility: Comply with GB/T 18268 (1EC61326-1) Applicable Field Equipment: 2-wire, 3-wire transmitter, current source Product Description:  DC24V power supply, provides isolated power distribution for the transmitter on site, and at the same time isolates and transmits the current signal generated by the transmitter from the site to the control room, PLC, DCS and other input terminal interface current source, 2-wire system, 3-wire system transmitter General purpose; internal use of high-efficiency magnetic isolation technology, isolation between input, output, and power supply, with high accuracy, high linearity, low temperature drift and other characteristics. Package List: 1 x DC Signal Isolator Note: The installation location must not have strong vibration, and the intensity of electromagnetic interference from the signal terminal, power supply terminal and space exceeding the third category of the IEC61000‑4 series of industrial field electromagnetic interference, and the use environment must not be harmful to metal and plastic parts. substance. Package List 1 x DC Signal Isolator