DC 4.5V-5.5V 35MHz-4400MHz Signal Generator ADF4351 Signal Source 1K/10K/100K/1M High Precision Frequency Output

¥4,949
+ 配送料¥399

DC 4.5V-5.5V 35MHz-4400MHz Signal Generator ADF4351 Signal Source 1K/10K/100K/1M High Precision Frequency Output

  • ブランド: Unbranded

DC 4.5V-5.5V 35MHz-4400MHz Signal Generator ADF4351 Signal Source 1K/10K/100K/1M High Precision Frequency Output

  • ブランド: Unbranded
価格: ¥4,949
販売元:
¥4,949
+ 配送料¥399

在庫あり

以下の支払い方法を利用することができます

説明

Power supply interface: Type-C Power supply voltage: DC 4.5V-5.5V Standby current: Less than 25mA. Emission current: Less than 150mA. Output impedance: 50 ohms Output frequency range: 35MHz-4400MHz. Output step: 1KHz-8KHz. Output: SMA standard interface inner hole. Output power:- 1dBm (W) @ 150MHz (absolute value of test power) approximately 1 mW Size: 80mm x 75mm x 30mm (excluding interface) The operating keyboard of this product has 15 ppt keys, 0-9 numeric keys, 10 "++" and "-" keys to adjust the frequency of use, and also generates emission output behavior. Short pressing the "++" or "-" keys add 1kHz or negative 1kHz to the original frequency output. Pressing the "++" or "-" keys for more than 1 second result in continuous or continuous subtraction scanning mode. 1kHz when stepping from 35kHz to 138MHz; 138MHz is 138kHz. The steps are 10kHz at~550MHz and 100kHz at 550MHz~4000MHz. To end the scan, simply the "++", "-", or "OK" buttons. The 'OK' button is the output control button. again to stop the mission. The emission behavior caused by "++" or "-" requires pressing "OK" twice to end the mission, and the product display "》" in the upper right corner. When the output emission behavior occurs, the "C" key terminate the mission with a frequency of zero. Step "()" key, used for continuous addition and subtraction scanning mode for easy adjustment, cyclically selecting steps "1K", "10K", "100K", "1M". By pressing the "()" button, the underlying LCD1602 defaults to the "(1k)" step indication when powered on. Four types of step states can be executed in a loop. Color: Green Material: ABS Package Contents: 1 * signal generator 1 * charging cable 1 * antenna Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little d
  • ブランド: Unbranded
  • カテゴリー: 発振回路
  • 色: Green
  • Fruugo ID: 422955826-889965135
  • EAN: 6132359522354

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

メーカー型番: I500867278
シリアルナンバー: I500867278

配送と返品

24時間以内に発送

  • STANDARD: ¥399 - 間の配達 木 23 10月 2025–金 31 10月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Shenzhen Haoyouqu Electronics Ltd.
  • Shenzhen Haoyouqu Electronics Ltd.
  • Tian'an Community,Shatou Subdistrict,Futian District
  • shenzhen
  • CN
  • 518000
  • zhijun425@outlook.com
  • 15320490316

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr, 56,40239 Duesseldorf
  • Düsseldorf
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698