Wideband coverage: 10MHz-6000MHz, supporting 9kHz-10GHz gain response High gain performance: Typical gain of 14dB (1GHz), with excellent band flatness Low power design: Operating current is only 45mA, and the voltage support is 3.9V-5V Low noise figure: NF as low as 3.6dB, improving signal reception sensitivity High power handling: P1dB compression point reaches 15dBm 1GHz, IP3 is 29.8dBm 1GHz This product is a high-performance, low-power RF amplifier module. It utilizes the premium TQP369180 chip, operating from DC to 6 GHz. It boasts a gain of up to 14dB, draws only 45mA, and supports a single 5V power supply. Frequency Range: DC-6 GHz Gain:1 GHz: 14.9 dB Gain Flatness (10 MHz-6 GHz): ±1.5 dB Noise Figure 1 GHz: 3.6 dB P1dB Compression Point:1 GHz: 15 dBm Third-Order Intermodulation Point:1 GHz: 29.8 dBm Operating Voltage: +5 V Operating Current: 45 mA Connector Impedance: 50 Ω Connector Type: SMA Female (Male Thread, Female Hole) Precautions: Avoid exceeding the maximum input power (recommended ≤ 10 dBm) to prevent damage to the module. Use a 50 Ω impedance-matched cable to connect to the system. Color: Black Material: PCB Package Contents: 1 x RF Module