Description: Brushless, maintenance-free permanent magnetic rotor. Epoxy resin sealed stator and circuit board. The shaft is surrounded by static sealing, which can avoid leakage problems. Low noise (less than 35dB), low power consumption, small size and high efficiency. Specifications: Condition: New Colour: black. Voltage: 12 V DC. Current: 0.4A Power: 5 W. Maximum water height: 2M Maximum flow rate: 420L/H Starting voltage: 4.5 V. Waterproof level: IP68 Ambient temperature: -20~60℃ Operating humidity: less than 90% relative humidity Liquid temperature: -20~60℃ Liquid use: water or non-flammable liquid with good fluidity Place of operation: fountains, etc. Sound without height: less than 35dB. PUMP shell material: ABS Motor magnet: ferrite magnets. The pump connector is 5521 female head, and the power supply must be 5521 male head. Weight: approx. 142g Package includes: 1 x DC 12V Micro Submersible Water Pump Tips: 1. Please allow 1-2 mm error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same, the colour of the item shown in the photos may be slightly different from the actual item. Please take the real one by default. 3. Please note that the new type and old type of this product will be sent at random, and make sure you do not mind before ordering. Features Adopt high performance stainless steel shaft. Amphibious design, able to work on land or water. Electronic components used to change direction, no need to use carbon brush. Submersible water pump for fountain, fish pond, etc.Without separate lubrication and cooling water, reducing energy consumption. Low noise (less than 35dB), low power consumption, small size and high efficiency, and can be used for hot water circulation. Unique resin potting, good insulation properties, 100% waterproof.