Description:_x000D_ _x000D_ If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 24V DC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications. _x000D_ _x000D_ _x000D_ Features: _x000D_ This is a normally close type electric solenoid valve, power on to open it and power off to close it. _x000D_ Connect to DC 24V voltage and the suggested input current is more than 2A to ensure a stable performance. _x000D_ The high quality brass valve body would hold a press up to 1Mpa and liquid temperature from -5 to 100._x000D_ _x000D_ Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications. _x000D_ This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water._x000D_ _x000D_ Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes._x000D_ _x000D_ _x000D_ _x000D_ Specifications: _x000D_ Valve Body: Brass _x000D_ Input Voltage: DC24V _x000D_ Input Current: >2A _x000D_ Power: 16W _x000D_ Type: NC(Normally Close)_x000D_ Pressure: 0-1.0Mpa_x000D_ Thread Size: 3/4" BSPP (DN20)_x000D_ Flow Orifice: 20mm_x000D_ Seal Material: NBR_x000D_ Liquid Temperature: -5~100 _x000D_ Suitable for: Non-corrosive oil, water, gas, etc _x000D_ _x000D_ _x000D_ Package Includes: _x000D_ 1 x Solenoid Valve _x000D_