DC5V High Digital Inductance and Capacitance Measuring Instrument Frequency Meter with Case

¥4,399
+ 配送料¥2,099

DC5V High Digital Inductance and Capacitance Measuring Instrument Frequency Meter with Case

販売元:

¥4,399

保存する ¥14,791 (77%)

希望小売価格

¥19,190
在庫あり
+ 配送料¥2,099

14日間返品ポリシー

支払い方法:

  • ブランド: Unbranded

商品詳細

商品詳細

DC5V High Digital Inductance and Capacitance Measuring Instrument Frequency Meter with Case

DC5V High Digital Inductance and Capacitance Measuring Instrument Frequency Meter with Case Features: 1. Avoid hand contact with the board, beautiful and . 2. Multi-functional measuring instrument electronic DIY kit, simple operation, easy to use. 3. High-definition liquid crystal display, large LCD, digital symbols show clearly, easy to read. 4. With multifunctional rotary gear, you can choose different functions, and measurement is more convenient. 5. Can measure non-polarized capacitance, polarized electrolytic capacitance, inductance, and frequency. Specifications: Power supply voltage: USB-powered DC 5V (DC power socket) Measurement range of non- capacitance: 1pF~2200pF Polarized capacitance measurement range: 1uF~12000uF Inductance measurement range: 1uH~1H Frequency measurement range: 20Hz~400KHz PCB board size: 91 x 80mm Use tips: 1, the kit supply voltage is DC voltage 5V, try to use a power supply with fewer stray waves and stable output. 2, each time before powering on, all switches should -up, and power on about 2 seconds before the display. 3, after the display, before installing the shell, adjust the potentiometer so that the voltage between pin 4 and pin 5 of the LM393 is 3.16V. 4, measure what components are rotated to the corresponding gear. 5, measurement of non-polarized capacitance, inductance does not distinguish between positive and negative, frequency and electrolytic capacitors to distinguish between positive and negative contact to determine good. 6, the tail number of the readings are not rounded and fictitious optimization, all the tail number has jumped is normal. Whether with a shell: with Case Material: PCB+components colour: As shown Package Contents: 1 x DIY Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • ブランド: Unbranded
  • カテゴリー: 露出計
  • Fruugo ID: 476892474-994163640
  • EAN: 8172244101545
安全性

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.

配送

配達

4日間以内に発送

  • STANDARD: ¥2,099 - 間の配達 水 14 10月 2026–木 22 10月 2026

中国より発送。

返品

返品

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。

全額返金ポリシーを見る