Feature: 1. NP FW50 Full Decoding Battery: Offers the same performance as the original NP FW50 battery, making it an excellent alternative for LP E6 batteries. Provides continuous power for long duration photography sessions. 2. Supports TYPE C Fast Charging Protocol: Compatible with popular fast charging adapters in the market, such as 9V, 12V, 15V, and 20V. Input range from 9 to 20V, output 8.4V (Maximum 24W). 3. Safety Protection Circuit: Built in overvoltage, overcurrent, and short circuit protection circuit ensures safe usage, providing peace of mind even with counterfeit batteries, offering enhanced camera protection. 4. High Conversion Efficiency: Wide voltage power supply with a conversion efficiency of up to 98%, generating minimal heat while delivering high power output, allowing for continuous shooting without interruptions. 5. Easy to Use: Type C interface compatible with various devices, including car power adapters, PD QC chargers, enabling stress free indoor and outdoor photography sessions. Power indicator light displays working status at a glance. Specification: Item Type: Digital Camera Dummy Battery Material: ABS, metal Weight: Approx. 32g/1.1oz Cable Length: Approx. 50cm/19.7in TYPE C Input: QC PD 9 to 20V TYPE C Output: 8.4V (Maximum 24W) Support fixed voltage or single chip control mode Support PD Protocol: 5V, 9V, 12V, 15V, 20V Support QC Protocol: 5V, 9V, 12V, 20V Support FCP Protocol: 5V, 9V, 12V Support for Samsung AFC Protocol: 5V, 9V CLASS A and CLASS B voltage levels are supported Applicable Model: Suitable for A7, A7R, A7S, A7II, A7RII, A7SII, A6500, A6400, A6300, A6100, A6000, A5100, A5000, A3000, NEX5, NEX7, DSC RX10 II, III, IV, ZV E10 and other digital cameras Package List: 1 x Digital Camera Dummy Battery 1 x TYPE C to TYPE C Cable How To Use 1. Use USB to TYPE C cable or TYPE C to TYPE C cable to access the power supply with fast charging agreement 2. Insert the dummy battery into the TYPE C end, the green POWER indicator light is on for normal operation, and if it is not on, there is no power input 3. The dummy battery into the battery compartment, cover the battery cover 4. Open the camera power switch for normal use Note: (When the input is 9V when the output may only be 7.8V for the normal voltage drop, can be used normally, the camera may not show full power)