Digital delay relay LED display timer control switch adjustable timer relay delay switch

Instructions for Use: 1. After setting the data, please wait 6 seconds. The module will automatically save the data after 6 seconds. 2. Press the SET button once to enter the time setting mode. The red LED indicator will flash. Press this button to increase or decrease the set time T1. 3. After setting the time T1, press the SET button again briefly. The green LED indicator will flash. Press this button to set the time T2. After setting T2, press the SET button again briefly. The system will automatically save the set time, or wait 6 seconds. The module will automatically save the data. 4. Press and hold the SET button to enter the parameter setting mode. There are two sets of parameters to choose from: P0 and P1. In the current mode, a short press of the SET button can switch between P0 and P1. 5. In P0 mode, you can adjust its own timing mode using the buttons. In P1 mode, you can set the parameters by increasing or decreasing the working mode. P0-0: T1 timing mode is seconds. P0-1: T1 timing mode is minutes. P0--2: T1 timing mode is hour. P1--0: Delay for T1 time, relay engages (T1 timer). P1--1: Delay for T1 time, then release the relay (T1 timer). P1--2: Delay for T1 time, relay engages (T1 timer), delay for T2 time, then release the relay (T2 timer), loop. P1--3: Delay for T1 time, then release the relay (T1 timer), delay for T2 time, then engage the relay (T2 timer), loop. P1--5: Delay for T1 time, then release the relay (T1 timer), delay for T2 time, then engage the relay (T2 timer), loop. Timing, relay engagement (T2 timer), loop. Specifications: Timing Range: 0-999 seconds, 0-999 minutes, 0-999 hours Relay: 20A Operating Current: 10A (Max) Power: 1500W (Max) Dimensions: 79 x 26 x 43 mm / 2.99 inch x 1.02 inch x 1.69 inch Opening Size: 72 x 40 mm / 2.83 inch x 1.57 inch Type: Timing Relay Contact Load: Low Power Model: Digital Time Delay Relay Applications: Voltage: AC110-220V Color: Gray Material: Plastic Package Contents: 1 x Dual Display Time Delay Relay This package contains only the contents listed above and does not include other items. Note: Lighting and different monitors may cause the product color to differ slightly from the actual item. Measurement error is allowed within +/- 1-3 cm.