Digital Humidity Controller 0-99%RH with Sensor, AC 110-220V 10A

Connect the power and display the humidity indicator.<br> Set the initial humidity: Press the UP key to display the initial humidity value, hold for approximately 3 seconds until the value begins flashing, then use UP or DOWN to adjust the setting.<br> Set the humidity stop point: Press the DOWN key to display the humidity stop value, hold for approximately 3 seconds until the value begins flashing, then use UP or DOWN to adjust the setting.<br> Restore factory settings: Press and hold both UP and DOWN keys simultaneously; the display will show “888” and automatically initiate humidity detection.<br> Model: XH-W3005<br> Humidity range: 00%–99% RH<br> Humidity control accuracy: 0.1% RH<br> Measurement accuracy: ±2% RH<br> Load power: AC 110–220 V, 1500 W<br> Maximum output current: 10 A<br> Output type: Direct output<br> Dimensions: 60 × 45 × 31 mm<br> Material: Metal + Plastic<br> Color: As shown<br> Package contents:<br> 2 × Humidity Controller<br> Note: Color may vary slightly due to lighting conditions and screen settings. Measurement tolerance: ±1–3 cm.