DIY Headlight Restoration Kit Car Headlight Glass Cleaning Kit Steam Liquid Clean Opaque Car Headlights Polishing Vapor Kit FN9U3064

¥8,990
配送料無料

DIY Headlight Restoration Kit Car Headlight Glass Cleaning Kit Steam Liquid Clean Opaque Car Headlights Polishing Vapor Kit FN9U3064

  • ブランド: Unbranded

DIY Headlight Restoration Kit Car Headlight Glass Cleaning Kit Steam Liquid Clean Opaque Car Headlights Polishing Vapor Kit FN9U3064

  • ブランド: Unbranded
希望小売価格: ¥10,790
価格: ¥8,990
得する金額: ¥1,800 (16%)
販売元:
¥8,990
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Usage Steps:1. Cleaning: Wipe the surface of the headlight with a clean cloth. 2. Masking: Use tape to isolate and limit the area to prevent coating damage. 3. Manual Sanding: Use wet sandpaper during the manual sanding process. It is recommended to change the motion direction when replacing the sandpaper. For example, if sanding horizontally with P180, the next sandpaper (P240) should be used vertically. Be cautious during sanding to avoid damaging the edges of the headlight. After the sanding process, use a tissue to dry any moisture on the headlight's surface. The surface should appear uniformly smooth, white, and free from sanding marks. 4. Surface Treatment: After completing the sanding process, surface treatment must be carried out using a spray system for a perfect result. Pour 60ml to 80ml of the repair solution into the vaporizing cup. It is acceptable to pour more than the required amount, as any excess liquid can be stored for future use. It is crucial to ensure the appropriate initial dosage to complete the entire process at once. Connect the cup to the power supply and wait for approximately three minutes until steam appears. Hold the cup's handle with your right hand and evenly and slowly move the cup's outlet about 1cm away from the headlight's surface. The steam action will make the headlight surface shine. If there are deeper scratches, allow the steam to act in that area for a bit longer. After completing the repair, immediately turn off the power. Wait for two minutes, then open the lid and pour any remaining liquid back into the bottle.Frequently Asked Questions: Device not working: Do not turn on the power when the device is not in use, and do not keep it connected for more than 5 minutes, as overheating may damage the device. Liquid dripping on headlights: The repair liquid used for headlights is highly volatile and turns into a gas when heated. Condensation occurs on the outlet tube's inner wall, and dripping may occur upon contact with condensed liquid (similar to water). To prevent this, avoid inverting the gas tube. If any drips occur, repeat all surface treatment steps in the affected area. Unsatisfactory repair results: To achieve successful results, do not overlook the sanding process. Uniform sanding throughout the entire headlight area is a necessary condition for successful restoration. Inadequate steam effect: Do not use the product in windy conditions. When performing the surface vaporization of the headlights, maintain a constant speed and even movement. Return Policy All of our items come with a 30-day free return policy. If you need to return, please contact us, let us know the detailed problem and send us some pictures for confirmation. We reserve the right to refuse any returns for objective reasons. Shipping Policy All of our items are shipped free with tracking numbers. Orders will be shipped within 3 working days upon receipt of payment. Most orders will be shipped within 1 working day. In most cases, shipping takes 8-12 working days.
  • Fruugo ID: 261026324-571198284
  • EAN: 7987248593064

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark

配送と返品

3日間以内に発送

  • STANDARD: 無料 - 間の配達 水 29 10月 2025–月 17 11月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Advance Parts Zone
  • Shenzhen Mike Technology Co. Ltd.
  • No. 108 Donghuan 1st Road
  • Yousong Technology Building 4-B01
  • Shenzhen
  • CN
  • 518000
  • miekortech@hotmail.com
  • +8613714168241

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • Ben XU
  • REP Europe GmbH
  • Annastr. 9 B
  • Griesheim
  • Germany
  • 64347
  • info@rep-europe.de
  • +4915751253212
  • http://www.rep-europe.de/