DN40 and DN50 Water Flow Sensor - Hall Effect Flowmeter for Accurate Measurement in UK Systems

¥12,490
配送料無料

DN40 and DN50 Water Flow Sensor - Hall Effect Flowmeter for Accurate Measurement in UK Systems

  • ブランド: Unbranded

DN40 and DN50 Water Flow Sensor - Hall Effect Flowmeter for Accurate Measurement in UK Systems

  • ブランド: Unbranded
希望小売価格: ¥14,690
価格: ¥12,490
得する金額: ¥2,200 (14%)
販売元:
¥12,490
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

100% brand new and high quality Features:Minimum rated working voltage: DC 5V-24VMaximum operating current: 15 mA (DC 5V)Operating voltage range: DC 5~18 VLoad capacity: 10 mA (DC 5V)Operating temperature range: 80CHumidity range: 35% to 90% RH (no frosting)Allowable withstand pressure: water pressure below 1.75MpaStorage temperature: -25 ~ +80 CPreservation humidity: 25% to 95% RHOutput pulse high level: DC 4.5 V (input voltage DC 5 V)Output pulse low level: DC 0.5 V (input voltage DC 5 V)Accuracy (flow--pulse output): 10~200L/min3%Output pulse duty cycle: 5010%Output rise time: 0.04SOutput fall time: 0.18SFlow-pulse characteristics: horizontal test pulse frequency (Hz) = [0.2x Q] 3% (level test) (Q is flow rate L/min)Impact resistance: The product is packed well, free from the 50cm height X, Y, Z direction to the concrete surface without abnormalities, the accuracy changes within 5%.Insulation resistance: The insulation resistance between the Hall sensor and the copper valve body is 100 M or more. (DC 500V)Heat resistance: placed in 803C environment for 48h, returning to normal temperature for 1-2h without abnormality, and the parts have no crack, slack, expansion, deformation, etc., and the accuracy changes within 10%.Cold resistance: placed in -203C environment for 48h, returned to normal temperature for 1-2h without abnormality, and the parts have no crack, slack, expansion, deformation, etc., and the accuracy changes within 10%.Moisture resistance: After being taken out for 72 hours in an environment of 402C and relative humidity of 90% to 95% RH, the insulation resistance is 1 M or more.Pulling strength: Applying a pulling force of 10N for 1 minute on the lead wire, no looseness or breakage, and no change in performance.Durability: At normal temperature, 0.1MPa water pressure is introduced from the water inlet to turn on 1S, and 0.5S is turned off. Specification:Type: Flow SensorMaterial: PlasticApplications: Suitable for automatic gas water heatersFeatures: Turbine flow sensor, instrumentation, measurement, insulation, impact resistance, durability, convenient and practical, toolsDimension: app.9.2cm/3.62inColor: BlackType: DN40, DN50 (optional)Quantity: 1 Pc Note:1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
  • Fruugo ID: 417131891-880200201
  • EAN: 9143578208599

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN.

配送と返品

24時間以内に発送

  • STANDARD: 無料 - 間の配達 木 16 10月 2025–金 24 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • CREA
  • CREA
  • 1-3 Boulevard Charles de Gaulle Colombes 92700 FR
  • Colombes
  • FR
  • 92700
  • xmchymx@outlook.com
  • 86-13312976782
  • https://www.fruugo.co.uk/xinyushi-qimei-kejiyouxian-gongsi/m-16091

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69,60329 Frankfurt am Main,Hessen, Deutschland
  • Frankfurt am Main
  • DE
  • 60329
  • E-CrossStu@web.de
  • +4969332967674
  • https://www.fruugo.co.uk/xinyushi-qimei-kejiyouxian-gongsi/m-16091