1) 16K DP Switch Supports resolutions up to 8K@120Hz, 4K@240Hz, and 1080P@240Hz Data transfer rate up to 40 Gbps Backward compatible with all previous DisplayPort standards To enjoy the full visual effects, connect a standard DP 16K cable If the screen flickers during use, unplug and reconnect, and use a shorter cable 2) 16K DP 1.4 Splitter Supports resolutions up to 8K@, 4K@240Hz, and 1080P@240Hz Data transfer rate up to 40 Gbps Backward compatible with all previous DisplayPort standards To enjoy the full visual effects, connect a standard DP 16K cable Note: The total length of input plus output cables should not exceed 3 meters; if it exceeds 3 meters, the signal may be shielded 3) BiDirection DP Switch The DisplayPort Switcher allows you to connect two DP sources to one DP display, or connect one DisplayPort source to toggle between two displays Two displays cannot display simultaneously; use the Select button to switch between the two displays When connecting to a Source or Display, you must power the splitter with the USB cable, or the display may not show anything Do not use cables longer than a total of 3 meters between the switcher and your devices Use scenarios Case 1: Share a single monitor between two computers. Use the 16K DP Switch to connect two DP sources to one display and press Select to switch between them. Case 2: Drive two displays from one DP source. Use the 16K DP 1.4 Splitter to mirror the same image on two monitors for presentations or a dualscreen setup. Case 3: Flexible multimonitor workflow in a small office. Use the BiDirection DP Switch to toggle between two sources (for example, laptop and desktop) to a single monitor, or route one source to two displays as needed. Ensure USB power is connected when using Source or Display connections, and keep cable lengths within 3 meters.