ProTek25 BNF Specifications - Passx-d 20A Whoop AIO - Motor: XING 1404 5500KV - Wheelbase: 114mm - Body size: 91*68.7mm - Bottom plate thickness: 3mm - Top plate thickness: 2mm - Spacing of top and bottom: 24mm (aluminum blocking height) - Propeller size: 2.5 inch - FC model: 25.5*25.5mm / 20*20mmmm - FPV cam spacing: 20mm - Weight: 194.3g (without battery) ProTek25 Quad BNF included components and parts Pre-built and tested quadcopter -1x ProTek25 Frame -1x Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC -1xAlbatros LHCPRP-SMA 5.8g antenna -2x Nazgul 2525 propeller (set of 4 colors may vary) -2x iFlight Lipo Strap 15*200mm (Color May Vary) -1x Black TPU Bare GoPro Pedal Foot (Bare GoPro Pad Not Included) FC //succeed-d 20A F4 Whoop AIO *Size: 30.5*30.5mm *Model mounting size: 25.5*25.5mm/fairy 3mm * Connector: Micro-USB * MCU:STM32F411 * Gyro:MPU6000 * Black box: 8MB * BEC output: 5V 2A/10V 2A * IN A pad:UART2 (nR2) * Barometer: no * Constant Current: 20A,25A (burst) * Input: 2-4S * Current sensor: yes * BLHeli: blheli-s * ESC Telemetry: no * Lens: IFLIGHT_F411_PRO * Firmware ESC: GH-30 BLS VTX // Success Micro Force 5.8GHz 300mW Adjustable VTX - Power: Pit/25/100/200mW/300mW - Antenna Interface: IPEX (UFL) - VTX Protocol: Tramp IRC - Size: 13.5x14 .5mm -Weight: 1.4g