WiFi Radio Telemetry Module V1.0 Overview This compact WiFi telemetry module provides stable real time flight control data transmission over a 100 m to 200 m range. It is designed for direct connection to common flight controllers and supports MAVLink2 for reliable communication during testing and flight operations. Key benefits Real time telemetry over WiFi for monitoring and control at short to medium ranges. Simple, direct connection to flight controllers for easy integration into existing drone setups. Low weight and compact size reduce added bulk and preserve payload capacity. Clear LED indicators for power and connection status to simplify troubleshooting and setup. Specifications Color: V1.0 Wireless range: 100 m to 200 m, depending on environment and antenna orientation Protocol: MAVLink2 compatible Connection: 6P cable to flight controller LED indicators: Red power LED on; blue connection LED flashes when linked to ground control, remains on when disconnected Compatibility and connection notes Connect using the supplied 6P cable to the flight controller. Port availability can depend on flight controller firmware and hardware layout. For PX4 firmware use the TELEM1 port only. For Ardupilot firmware it is recommended to use TELEM2 or another available telemetry port. Compatible with Pixhawk and APM style flight controllers and similar systems that accept a 6P telemetry connection. Power and usage guidance Power the flight controller using a Power Module or a 5 V ESC to ensure stable telemetry. Do not rely on the USB connection for power during telemetry use, as USB has higher priority and will disable radio telemetry when connected. LED behavior: red LED indicates module power; blue LED flashes when a ground control station is connected and remains on when no connection is active. Practical applications Field testing and tuning: Monitor sensor output, flight modes, and logs in real time while adjusting parameters on the ground. Aerial surveying and mapping flights: Receive live telemetry to confirm telemetry health and flight status during data collection missions. Development and prototyping: Use with research or custom autopilot projects for short range testing and debugging. Why choose this module Designed for straightforward integration with common flight controllers using a standard 6P telemetry connection. Supports MAVLink2 for compatibility with modern ground control software. Compact and lightweight, offering dependable telemetry without significant added mass. Package considerations Includes WiFi telemetry module and 6P connection cable. Refer to your flight controller documentation for port selection and wiring details. Safety and setup tips Verify the correct telemetry port for your firmware before powering up. Use a proper power module or 5 V ESC for the flight controller to ensure continuous telemetry operation. Test range and signal reliability in the intended operating environment prior to mission flights.