Features: After baking the DTF hot melt adhesive powder, solid white for more vibrant colors. Even and regular particles for the fine quality of graphic and good adherence. Finely coated film for no pinholes! No worry about the dyes on special fabrics evaporating and affecting the color of the pattern itself. Process: 1. Print the image onto the matte side of film in mirror mode. 2. Apply white dtf transfer powder evenly and remove the excess powder 3. Hovering to bake the hot melt powder (170C, 5min) 4. Transfer the image by heat press at 140C for 15sec with medium pressure 5. Cold Peel (remove the film gently) 6. Heat press again for curing (140C, 5sec) with medium pressure Package included: 1x White DTF powder. 1x Spoon.