100% quality 20 Pin Sockets Oil Service Reset Tool Condition: New Color: Black Cable length: Approx. 30 cm Operating Instructions: 1. Plug the device into the 20 pin diagnostic socket of the car located in the engine compartment. 2. Turn ignition key to enable the board electronics but do not start the engine. 3. Press the button for the operation you want to perform and keep it pressed. 4. The LED of the chosen operation will illuminate. 5. Keep the button pressed. 6. Reset is complete when the LED turns off automatically. 7. Release the button. Note: On some dashboards, an inspection reset may be required before performing an oil reset. Fitment: - 1986–2001 E30, E36 (3 Series) - 1989–2001 E34, E39 (5 Series) - 1996–2001 E38 (7 Series) Includes: 1 x 20 Pin Sockets Oil Service Reset Tool