Product Latest Versions and Support Systems: Applicable to WINDOWS XP, or WIN7 32-bit, not other systems Feature: *High quality cable with green PCB board with switch on the cable. *Easy to follow the installation instructions that come with the cable. Basically a "one-click" install, no setup required Puzzled! *While this cable will work with the car (using the ISTA procedure provided above), the procedure Included below is work from 1996-2009. *Connect to USB *(1.5 m cable, creates virtual COM port) *Support double K line *Support high-speed CAN (500 kbit/s) *Supports low speed CAN PT (100 kbit/s) Detect battery voltage through control line Detect contact via control wire *For USB port. Program: -INPA 5.0.6 -EDIABAS 7.3.0 NCS Expert and NCS Dummy -EDIABAS Tools 32 -WinKFP 5.3.1 -BMW Coding Tool -USB driver for cable Function: Easily switch between old and new models --Read and erase error codes --adaptation -encoding --Double K line support --High-speed D-CAN and PT-CAN support --Low-speed PT-CAN support --Detect battery voltage through control line --Detect ignition voltage through control line --Flash data upload and download --input/output control --CAN BUS mode simulation --FTDI FT232RL Chipset Supported Models: K-CAN models: BMW 1 Series E87 BMW 3 Series E46 E83 E90 BMW 5 Series E39 E60 E61 BMW 6 Series E63 E64 BMW 7 Series E38 E65 E66 BMW X Series E53 BMW Z series E85 E52 D-CAN Models: After E60, E61 32007 Post E83 9/2006 After E81, E87 32007 After E90, E91, E92, E93 32007 E53 E70 (New X5) R56 (New Mini) Package Included: 1 x INPA with Edibas K+DCAN USB port 1 x CD software driver