Specifications:<br> Battery Type: 1x 9V battery (Not Included)<br> Item Weight: 0.3kg<br> Hardware Version: OEC-T5<br> Software Version: EL-50448<br> Material Type: ABS<br> Color: Black + Orange<br> How to use EL 50448 TPMS Activation Tool:<br> Step 1:<br> Enter leaning mode<br> Set the gearshift lever to "P"<br> Put the ignition switch to ON<br> Enter the interface of tire pressure display by DIC<br> DIC shows "Press Set / Ctrl to re-learn"<br> Press Set / Ctrl<br> The turn signal light is on for 3 seconds and the horn beeps twice to enter the learning mode<br> Step 2:<br> Read tire pressure sensor information<br> from the front-left wheel,<br> Place the EL-50448 Tool antenna up against the valve core, to the rim and tire sidewall<br> Press the Button<br> The tire pressure sensor information is successfully read when the horn once<br> Step 3:<br> to read other tire pressure information<br> the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.<br> Turn signal lights turn on for 3 seconds and the horn twice when the learning is complete.<br> Tire Pressure Monitor Sensor TPMS Activation Tool EL-50448 OEC-T5<br> For vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.<br> Packaging includes<br> 1x EL-50448 Tire Pressure Reset Instrument<br> Only the above package content, other products are not included.<br> Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.