EP-041-2242MM 22x42mm M2 NGFF B-Key to T-Flash TF Card Reader B+M Key Adapter Board for Industrial Mobile SSD •This adapter card can convert TF card into SSD with NGFF(m.2) interface •Application fields Industrial computer motherboard,industrial computer,tablet computer,soft routing,POS machine,hard disk video recorder •Chipset sage s682 scheme,compatible with DOS,wince,WIN98/XP/Vista/NT,win7/8/10/11 and Linux operating systems •The SSD can be flexibly plugged in and out for equivalent industrial purposes,and the TF can be used as a mobile hard disk to realize the flexible movement of data storage •Compatible with SATA GEN1 and Gen2,with transmission rates of 1.5gbps and 3.0gbps respectively. The data transmission rate reaches 150mb/s and 300mb/s respectively. TF supports high-speed cards •It supports plug and play with BIOS and operating system,and can be used without any driver. It is recommended to cold plug after shutdown to realize the mobile storage of data. Do not hot plug TF and NGFF(m.2) •Compatible with NGFF(m.2) 2242mm SSD size. It can be used on desktop and notebook •Note: •Before using this product,please insert the TF card into the corresponding TF socket,and then insert it into the ngff (m.2) slot in the off state. After power on,the LED flashes,indicating that the data reading of TF card is normal. •After initial use or TF card configuration change,the TF card needs to be initialized and formatted. After formatting,you can perform any data operation on the TF card. Package included: •1 x Adapter Board •Other items not included