説明
Esp-wroom-32 Module Esp32 Test Board Test Burn Board Wireless Wifi Transceiver Development Module
Esp-wroom-32 Module Esp32 Test Board Test Burn Board Wireless Wifi Transceiver Development Module
Welcome to my shop:
Description:
It is a Downloader for ESP-WROOM-32 ESP-32 WIFI Wireless Module.It has output all GPIO ports for user debugging.
Feature:
1>.Super simple operation
2>.Repeatedly used
3>.Chip clip fixing
Parameter:
Work Voltage:DC 5V
Receiver Indicator:Yes
Transmitter Indicator:Yes
Power Indicator:Yes
Downloading Indicator:Yes
Suitable model:ESP-WROOM-32, ESP-WROOM-32D, ESP-WROOM-32U, ESP32-SOLO-1
Work Temperature:-25~85
Work Humidity:5%~95%RH
Size:51*50*15mm
Use Steps:
1>.Install CP2102 UART Driver Software on PC.
2>.Download FLASH tool 'ESP FLASH DOWN LOAD TOOL'.
3>.Insert ESP-WROOM-32 or ESP-WROOM-32D or ESP-WROOM-32U or ESP32-SOLO-1 on Module.
4>.Connect module to PC by USB cable.
5>.Download automatically:
5.1>.Open FLASH download tool.
5.2>.Set software parameters.
5.3>.Click START button on software to download firmware.
6>.Manual download:
6.1>.Open FLASH download tool.
6.2>.Set software parameters.
6.3>.Keep press PROG button about 5second.
Package:
1pcs Downloader Tester Shield for ESP-WROOM-32
Note:
1>.Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2>.Please allow slight dimension difference due to different manual measurement.
About this item It is a Downloader for ESP-WROOM-32 ESP-32 WIFI Wireless Module.It has output all GPIO ports for user debugging.
Use Steps:Install CP2102 UART Driver Software on PC.Download FLASH tool 'ESP FLASH DOWN LOAD TOOL'.Insert ESP-WROOM-32 or ESP-WROOM-32D or ESP-WROOM-32U or ESP32-SOLO-1 on Module.Connect module to PC by USB cable.
Download automatically:Open FLASH download tool.Set software parameters.Click START button on software to download firmware.
Manual download:Open FLASH download tool.Set software parameters.Keep press PROG button about 5second.Then short press Reset button.Click START button on software to download firmware.
Chip clip fixing, Repeatedly used, Super simple operation.Suitable model:ESP-WROOM-32, ESP-WROOM-32D, ESP-WROOM-32U, ESP32-SOLO-1
It is a Downloader for ESP-WROOM-32 ESP-32 WIFI Wireless Module.It has output all GPIO ports for user debugging.
Use Steps:Install CP2102 UART Driver Software on PC.Download FLASH tool 'ESP FLASH DOWN LOAD TOOL'.Insert ESP-WROOM-32 or ESP-WROOM-32D or ESP-WROOM-32U or ESP32-SOLO-1 on Module.Connect module to PC by USB cable.
Download automatically:Open FLASH download tool.Set software parameters.Click START button on software to download firmware.
Manual download:Open FLASH download tool.Set software parameters.Keep press PROG button about 5second.Then short press Reset button.Click START button on software to download firmware.
Chip clip fixing, Repeatedly used, Super simple operation.Suitable model:ESP-WROOM-32, ESP-WROOM-32D, ESP-WROOM-32U, ESP32-SOLO-1
-
ブランド:
Unbranded
-
カテゴリー:
開発ボード
-
Fruugo ID:
455431580-960024948
-
EAN:
7462417541881
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
WARNING! TO AVOID DANGER OF SUFFOCATION,KEEP AWAY FROM BABIES ANDCHILDREN. DO NOT USE IN CRIBS/BEDSOR PLAY PENS.THIS BAG IS NOT ATOY.
材料:
Octinoxate 7.1529%
メーカー型番:
KX272034
モデル番号:
KX331068
シリアルナンバー:
KX100257
バッチ番号:
KX011435
