説明
_x000D_
Clientes de Espaa atencin:
_x000D_
Cuando selecciona "Enviar desde Espaa", el servicio de entrega no est disponible en los siguientes cdigos postales:
_x000D_
35000-35999
_x000D_
38000-38999
_x000D_
_x000D_
Se recomienda que elija "Enviar desde China". Gracias! ! !
_x000D_
_x000D_
_x000D_
_x000D_
The United States customers attention:
_x000D_
When you select "Ship From United States", the following addresses will not provide delivery service: Hawaii, Alaska, Puerto Rico, Guam, APO, DPO, FPO, etc. Recommend you to choose "Ship From China".Thank you
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Description:
_x000D_
1. The main body of the module is ESP-WROOM-32 module, and the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
_x000D_
2. It has power indicator (red light) and working status indicator (blue light) on it, so you can know the status of the module at any time.
_x000D_
3. There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode. In addition, the pins on both sides of the development board are convenient for developers to connect and use.
_x000D_
4. The module has powerful Bluetooth-compatible and WiFi functions. As a Bluetooth-compatible and WiFi development board, it can obtain rich resources from Lexin and anxinco official websites.
_x000D_
5. In addition, the module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal, etc.
_x000D_
_x000D_
Feature:
_x000D_
1. The module is the ESP- WROOM-32 development board, and the ESP- WROOM32 parameter characteristic is also the parameter characteristic of the module.
_x000D_
2. 802.11b/g/WiFi + BT module.
_x000D_
3. Low power dual core 32-bit CPU, which can be used as application processor;
_x000D_
4. The main frequency is up to 240MHz, and the operation capacity is up to 600DMIPS.
_x000D_
5. Support UART / SPI / I2C / PWM / DAC / ADC and other interfaces;
_x000D_
6. Support openOCD debugging interface;
_x000D_
7. It supports multiple sleep modes, and the current reaches 6.5ua in deep sleep;
_x000D_
8. Embedded LwIP and FreeRTOS;
_x000D_
9. Support STA/AP/STA+AP mode;
_x000D_
10. Support Smart Config / Airkiss one key distribution network;
_x000D_
11. General at command, easy to use;
_x000D_
12. Support local serial port upgrade and remote upgrade (FOTA).
_x000D_
_x000D_
Specification:
_x000D_
SPIFlash: default 32Mbit
_x000D_
Bluetooth-compatible: Bluetooth-compatible 4.2 BR/EDR and BLE standards
_x000D_
Supporting interfaces: UART, SPI, SDIO, I2C, PWM, I2S, IR, ADC, DAC
_x000D_
On chip sensors: Hall sensor, temperature sensor, capacitive touch sensor
_x000D_
IO port: 22pcs
_x000D_
Serial port rate: 115200 BPS by default
_x000D_
Spectrum range: 2412 ~ 2484MHz
_x000D_
Antenna form: PCB antenna on board, gain 2dBi
_x000D_
Transmitting power: 802.11b: 17 2dbm (11Mbps) 802.11g: 14 + 2dbm (54Mbps) 802.11n: 13 2dbm (MCS7)
_x000D_
Receiving sensitivity: CCK, 1Mbps: - 90dbm CCK, 11Mbps: - 85dBm 6Mbps (1 / 2bpsk): - 88dbm 54Mbps (3 / 464-qam): - 70dBm mcs7 (65mbps, 72.2mbps): - 67dbm
_x000D_
Power consumption: 300mA 3.3V
_x000D_
Security: WPA / WPA2 / WPA2 Enterprise / WPS
_x000D_
Power supply range: USB power supply: 5V pin power supply: 5.0V~12V
_x000D_
Working temperature: - 20 ~ 85
_x000D_
Storage environment: - 40 ~ 90, < 90% RH
_x000D_
Product size: 52 * 29 * 15mm/2.04*1.14*0.59''
_x000D_
_x000D_
Note:
_x000D_
Please allow 1-3mm differs due to manual measurement.
_x000D_
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
-
ブランド:
Unbranded
-
カテゴリー:
開発ボード
-
Fruugo ID:
295762041-661512807
-
EAN:
4198010379134
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
WARNING! TO AVOID DANGER OF SUFFOCATION,KEEP AWAY FROM BABIES ANDCHILDREN. DO NOT USE IN CRIBS/BEDSOR PLAY PENS.THIS BAG IS NOT ATOY.
材料:
Octinoxate 8.2%
メーカー型番:
XWH713811
モデル番号:
XWH135232
シリアルナンバー:
XWH557255
バッチ番号:
XWH613832