1. ESP32-S3-Touch-LCD-7 is a microcontroller development board that supports 2.4GHz WiFi and BLE 5 2. Integrated with large-capacity Flash and PSRAM, onboard 7-inch capacitive touch screen, can smoothly run GUI interface programs such as LVGL; combined with a variety of peripheral interfaces, quickly develop ESP32-S3 HMI and other applications 3. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz 4. Support 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), onboard antenna 5. Built-in 512KB SRAM and 384KB ROM, stacked 8MB Flash and 8MB PSRAM<br><br>Onboard 7-inch capacitive touch screen, 800 x 480 resolution, 65K color Support I2C interface control capacitive touch, 5-point touch, support interruption Onboard CAN, RS485, I2C interface and Micro-SD card holder, etc., integrated full-speed USB serial port Support flexible clock, module power supply individual setting and other precise control, realize multi-scenario low power consumption mode Due to different batches, there may be differences in product appearance, color, and printed text, which will not affect the use. Color: As shown Material: PCB+LCD<br><br>Package Contents: 1 * ESP32-S3-LCD-7 Kit<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.