1. ESP32-S3-Touch-LCD-2.8 is a microcontroller development board that supports 2.4GHz WiFi and Bluetooth BLE 5. Integrated large-capacity Flash and PSRAM, with an onboard 2.8-inch capacitive touch screen, can smoothly run interface programs such as LVGL; combined with a variety of peripheral interfaces, it can quickly develop ESP32-S3 HMI and other applications. 2. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, clocked at up to 240MHz; supports 2.4 GHz Wi-Fi (802.11 b/g) and Bluetooth 5 (LE), onboard antenna 3. Onboard 512KB and 384KB ROM, stacked 16MB Flash and 8MB PSRAM, onboard 2.8-inch capacitive touch screen, 240x320 resolution, 262K color 4. Supports 12C interface to control capacitive touch, 5-point touch, supports interrupts, leads to UART, and some |0 interfaces, and integrates full-speed USB serial port 5. Onboard speaker, QMI8658 six- sensor, RTC clock sensor, card holder and battery charging management module, etc., support accurate control of flexible clocks, multiple power modes, etc., to achieve multi-scenario low power consumption mode Application fields: Multiple output, HMI human-machine interface, LVGL GUI development Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Not Affect The Use. Colour:As Shown Material:PCB+Plastic Package Contents: 1 * Touch Screen Development Board 1 * SH1.012PIN Connecting Cable (About 100mm) 2 * SH1.04PIN Connecting Cable (About 100mm) 1 * 2030 Speaker Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.