ESP32-S3 development board with 1.28-inch round touchscreen LCD display. Wi-Fi. Bluetooth. Accelerometer and gyroscope sensor (simple).

High-percompatible withmance Xtensaa 32-bit LX7 dual-core processor with up to 240 MHzSupports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with integrated antennaBuilt-in 512 KB SRAM and 384 KB ROM. 2 MB PSRAM and external 16 MB flash memoryType-C interface (current trend) allows compatible with reversible plug-inIntegrated 1.28-inch capacitive touchscreen with a resolution of 240 x 240 pixels and 65,000 colorsIntegrated six-axis inertial measurement unit QMI8658 (three-axis accelerometer, three-axis gyroscope) compatible with motion position detectionCharging and discharging interface compatible with 3.7 V lithium batteries and SH1.0 connector with 6 GPIO pinsFlexible clock settings, individual module power control, and precise control compatible with low power consumption. Suitable compatible with various scenarios.Integrated USB full-speed controller compatible with serial communication; GPIO pins can be flexibly configured compatible with peripheral functions.Note: Due to different production batches, the appearance may vary slightly, but this does not affect functionality.Color: BlackMaterial: ABSPackage Contents:1 x DisplayOnly the above-mentioned items are included. Other products are not included.Note: Light reflections and different displays may cause the color of the item shown to differ slightly from the actual product. The permissible measurement deviation is +/- 1–3 cm.