説明
Description
2X ESP8285 ESP-01M IR Transceiver Wifi Wireless Module Remote Control Switch Development Learning B
It is a Infrared ESP8285 Wireless WIFI Transceiver Module.The esp-01m module with ESP8285 as the core be used as the master control, The program is the same as ESP8266. The module board is equipped with an infrared receiving tube and an infrared transmitting tube which are respectively io14 and io4 controlled, and a burning port is set apart.
The demonstration program can read and emit infrared key values and raw codes,user can record infrared remote controls in your home , which can be controlled remotely if connected to the Internet of things platform.
Feature:
1.Support Infrared control
2.Support wireless WIFI control
3.Support firmware update
Parameter:
Model: ESP_IR-
Work Voltage:DC 5V
Work Temperature:-25~85
Work Humidity:5%~95%RH
Color: black
Material: PCB+ electronic components
Update firmware:
1.Connect IO0 and GND pins.
2.Connect module to PC by USB to UART converter.
3.Open software FLASH DOWNLOAD TOOLS V3.6.4.
4.Set parameters.
5.Click START to download firmware.
6.Remove connect between IO0 and GND pins then update complete.
Note:
When supplying power, you need to look for 5V and GND. The circuit has no reverse connection protection, and the wrong connection may burn the chip.
Package Contents:
2 x Wifi Wireless Module
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
-
ブランド:
unbrand
-
カテゴリー:
開発ボード
-
Fruugo ID:
436854388-915606907
-
EAN:
9032499109361
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Important Safety Instructions
Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction.
General Warnings
Intended Use: Use this product only for its intended purpose as described in the user manual.
Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision.
Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.
