RJ45 Connector PoE Splitter for IP Camera PoE Injector for Security IP Camera PoE Connector for IP Camera Wall Mount PoE Power Adapter Mini PoE Splitter Mini PoE Injector To achieve optimal performance of a Wireless LAN, the location of the Access Point (AP) must be carefully chosen. In most cases, finding a power supply for the AP is a common challenge. Power over Ethernet (PoE) technology provides an efficient power solution to overcome this issue. In Ethernet, four pairs of Category 5 or Category 5e twisted-pair cables are used for transmission. Data transmission uses only two pairs (pins 1/2 and 3/6), while PoE utilizes the remaining pairs (pins 4/5 and 7/8) to deliver power. Data Pins: 1/2, 3/6 Power Pins: 4/5 (+), 7/8 (−) Data Input: Connects to PC, Hub, or Switch Data Rate: 10/100 Mbps Ethernet Cable: TIA/EIA-568 Cat.5 Connector: RJ-45 Operating Temperature: 0–40°C Storage Temperature: −40–70°C Operating Humidity: 10–80% RH Storage Humidity: 5–90% RH Note: This device supports 10/100 Mbps only. No power adapter, grounding cable, or power cord included. Color: Black Dimensions: 50 mm × 25 mm × 25 mm Material: ABS + electronic components Package Includes: 6 × PoE Injector/Splitter Other accessories are not included. Note: Color may vary slightly due to screen settings and lighting conditions. Measurement tolerance: ±1–3 cm.