1. Comply with SAE J1772 standard 2. Beautiful appearance, with protective cover, support front installation 3. The pin head is designed with safety insulation to prevent accidental direct contact with human hands. Excellent protection performance, the protection level reaches IP54 4. Type: European change American Adaptor 5. Use: EV charging 6. Mechanical life: no-load plugging and unplugging 10000 times 7. Insertion force during coupling: 45N Less than 80N 8. Rated working current: 16A or 32A 9. Working voltage: 110V~250V 10. Insulation resistance: 1000M (DC500V) 11. Terminal temperature rise: Less than 50K 12. Withstand voltage: 2000V 13. Contact resistance: 0.5m Max 14. Working environment temperature: -30~+50 15. We recommend to use the following steps: Plug in the Type 2 end of the adapter to the charging cable; Plug in the Type 1 end of the adapter to the car's charging socket; After the adapter has clicked in place you are ready for the charge. Don't forget to activate the charging station. When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the adapter from the charging station when not in use. 16. Material: thermoplastic 17. colour: Black 18. Package Contents: 1 x Electric Cars Charging. Only the above package content, other are not included. 19. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.