Ferrule Removal Tool for Compression Ring Pulling Operations

[Operating Steps] Method 1: This ferrule puller is designed for disassembling sleeves only. Place the sleeve between the red notched end of the tool to clamp it securely. Method 2: Remove the compression nut and sleeve. Position the red notched end of the compression sleeve puller behind the compression nut. Align the tool correctly with the pipe, then rotate the handle approximately 10–15 turns to remove the nut and sleeve. [Save Time] This compression sleeve puller is easy to use in tight spaces and restores previously crimped copper pipes to a circular shape without damaging the copper material. It simplifies pipe work by making sleeve removal quick and efficient. [Wear Resistance] Even if existing valves are severely corroded or frozen, rotating the lever allows removal of the old compression sleeve from the pipe. Align the compression ring removal tool correctly with the pipe, then rotate the handle approximately 10–15 turns to remove the nut and sleeve. Helps quickly address minor leaks caused by failing compression valves. [No Damage to Walls or Copper] This compression ring puller removes leaking compression sleeves without damaging walls or pipes. It is designed for dismantling 1/2-inch copper water compression sleeves. Color: Red Material: Metal Package Contents: 1 × Compression Ring Puller Tool Note: Slight color variations may occur due to lighting and screen settings. Measurement tolerance: ±1–3 cm.