Input Priority: Left and Right stick emulation via D-pad inputs Per-button RGB LED support PWM and RGB player indicator LED support (XInput only) Saves options to internal memory Support for 128x64 monochrome I2C displays using SSD1306, SH1106 or SH1107 display drivers. Built-in configuration app hosted via embedded webserver...no downloading a separate app! Bootsel Mode: Bootsel Mode is the state of the board where firmware can be flashed onto the board. You will need to use this whenever there is an update or as part of the troubleshooting process. You can boot into Bootsel Mode by either holding S1 + S2 + UP buttons while plugging in the controller or by booting into the Web Configurator and then restarting in Bootsel Mode. Input Modes: To change the input mode, hold one of the following buttons as the controller is plugged in: A for Nintendo Switch B for XInput X for DirectInput/for PS3 Y for PS4 Input mode is saved across power cycles. Type:Black Key Colour:White Material:Acrylic+PCB Package Contents: 1 x Fight Stick Game Controller 1 x data cable(Data cable color is random, no specification is accepted)