Bending sensor. The degree of bending can be translated into a change in resistance value. The greater the bend, the higher the resistance. This sensor is suitable for use in electronic gloves. Bending direction: The side marked with text is the inner side during bending. Avoid bending the pin portion (non-flexible section) to prevent damage. Model: Flex Sensor 4.5 inch / 2.2 inch Technical Specifications: Straight resistance: 25 kΩ Resistance tolerance: ±30% Bent resistance range: 60 kΩ–110 kΩ Rated power: 0.5 W Peak power: 1 W Bending life: >1,000,000 cycles Operating temperature: −35°C to +80°C Interface type: 2-pin metal pins (0.1" pitch) Non-bent resistance: ~9 kΩ 90° bent resistance: ~14 kΩ 180° bent resistance: ~22 kΩ Output type: Analog Size: 11 x 1 x 1 cm / 7.5 x 1 x 1 cm Material: ABS Color: Yellow Package contents: 1 x Flex sensor Note: Color may vary slightly due to screen settings and lighting conditions. Measurement tolerance: ±1–3 cm.